REASONS YOUR WATER HEATER ISN'T FUNCTIONING

Reasons Your Water Heater Isn't Functioning

Reasons Your Water Heater Isn't Functioning

Blog Article

Schedule Now!

What're your beliefs about Hot Water Heater Repair?



Several modern houses use an electrical water heater for their heater, because of its ease and also ease of use. Nevertheless, much like any other electric appliances, problems may develop with its use, unexpectedly. It can be really discouraging to awaken to a cool shower instead of a hot one or having your bath with water that isn't hot adequate or perhaps also warm. Whatever the instance might be, water heater problems can be quite stressful. Luckily, we have actually made a checklist of feasible solutions to your water heater issues. There are a number of elements that might trigger much of these troubles, maybe an issue with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you turn off the main power supply for security. Whatever the issue is, getting it repaired must not present excessive of a problem if you comply with these actions:

Call An Expert:


If after changing all malfunctioning components as well as resetting your temperature, the water heater still isn't working, you may require to speak to a specialist plumber for a specialist viewpoint. The problem with your heater could be that the cold and hot faucets have been switched or it may be undersized for the quantity of warm water needed in your home. Whatever the instance might be, an expert plumber would aid fix the issue.

Check Your Power Supply:


As standard as this might seem, it is very essential. Without appropriate power, your water heater will certainly not operate. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power issue. Check if the fuse is burnt out or the breaker tripped. If the breaker is the problem, simply transform it off and on again. Change any type of broken or damaged fuse. Evaluate the appliance with power after these adjustments to see if it's now functioning.

Inspect Your Thermostat:


If your water heater still isn't functioning or the water coming out isn't warm enough, you may require to check the temperature level settings on your top thermostat. Make sure the circuit breaker is turned off before doing anything. Open up the access panel and also press the red button for temperature level reset above the thermostat. This should assist heat the water. Transform the circuit breaker back on and also check if the trouble has been settled.

Inspect the Burner in the Water Heater:


If it's not a power trouble, then attempt having a look at your burner if it is still working. Check each of your heating elements to ensure the problem isn't with any one of them. If any one of them is malfunctioning, change that part and after that examine whether the hot water is back on.

Verdict


Water heater issues are not always major. Most of them are due to small issues like a blown fuse or worn-out burner. Replacing the malfunctioning components should work. Nonetheless, if you are still not able to fix the problem, give a call to your closest plumber to come to get it repaired.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


No Hot Water — Water Heater Repair

I hope you liked our part about Hot Water Heater Repair. Thanks for taking a few minutes to browse our content. Enjoyed our posting? Please share it. Help other people find it. Thank you for going through it.




Explore

Report this page